久章草在线视频免费观看

  • Welcome to Chenyu Filling Machinery! Water Filling Machine | Juice Filling Machine | Carbonated Beverage Filling Machine
    PRODUCT CATEGORY
    You are here: Home ? Filling machine ? Blow Molding Machine ? 2 Cavity Blowing Molding Machine
    2 Cavity Blowing Molding Machine

    Blowing machine is a kind of equipment for making plastic granules into hollow containers through blow molding process. At present, the more common models include one-shot hollow extruding machine using PP and PE, and two moldings using PET, PC or PP. The injection stretch blow molding machine, as well as the newly developed multi-layer hollow extrusion blow and stretch blow molding.
    The blowing molding machine is convenient and quick, with a large amount of molding. After it appeared, it replaced most of the manual blowing bottles and was adopted by most beverage companies.

    Product description

    Blowing machine is a kind of equipment for making plastic granules into hollow containers through blow molding process. At present, the more common models include one-shot hollow extruding machine using PP and PE, and two moldings using PET, PC or PP. The injection stretch blow molding machine, as well as the newly developed multi-layer hollow extrusion blow and stretch blow molding.
    The blowing molding machine is convenient and quick, with a large amount of molding. After it appeared, it replaced most of the manual blowing bottles and was adopted by most beverage companies.

    Features of?Blowing Molding Machine:

    Blowing Molding Machine
    A. Stable performance with advanced PLC.
    B. Conveying preforms automatically with conveyor.
    C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
    D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

    Blowing Molding Machine
    E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
    F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
    G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
    H. Strong clamping force with high pressure and double crank links to lock the mold.
    I. Two ways of operating: automatic and manual.

    Blowing Molding Machine
    J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
    K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
    L. Contamination is avoided for the bottle body.
    M. Ideal effect of the chilling with the chilling system.
    N. Easy installation and starting.
    O. Low rejection rate: less than 0.3percent.

    Blowing Molding Machine

    Configuration List of Blowing Molding Machine:
    1.?Control System

    Blowing Molding Machine High response,?image high-quality control system,?specially support simple USB program upgrade,?providing?strong guarantee?for equipment upgrade, troubleshooting.
    Blowing Molding Machine Mitsubishi PLC,?generalized programming language,?program update,?convenient update,?free maintenance,?high precision,?fast response.

    2. Pneumatic System

    Blowing Molding Machine The servo motor use SMC cylinder.
    Low-pressure?control systems?match with FESTO and PARKER, respectively?assimilating and using the professional advantage of these top brands,?making the machine work more faster and improve response speed.
    Blowing Molding Machine High-pressure blowing control system all use Festo, diameter is large, fast response speed.

    3. Sensor System

    ?Blowing Molding Machine High quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
    ?Blowing Molding Machine

    4. Heating System

    ?Blowing Molding Machine YCQ automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp’s horizontal position is adjustable to keep the machine flexible.
    ?Blowing Molding Machine Cooling bottle neck avoid bottle neck deformation

    5. Clamping System

    ?Blowing Molding Machine YCQ adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
    ?Blowing Molding Machine
    Blowing Molding Machine
    Servo motor
    1, precision, speed and torque of the closed loop control;Overcome the problem of step motor;
    2, rotational speed, high speed performance is good, generally rated speed can reach 2000 ~ 2000 RPM;
    3.stability, low speed running smoothly, won’t produce similar to the stepper motor during low speed running step run phenomenon.Suitable for high speed response to the requirements of the occasion;
    4.timeliness: motor deceleration dynamic response time is short, usually within a few milliseconds.
    Blowing Molding Machine
    Reducer
    ?Blowing Molding Machine YCQ fully automatic pet bottle mchine.
    Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪.

    6. Parts Picture

    ?Blowing Machine ?Blowing Machine Blowing Machine
    Pressure regulating table Temperature control module Circuit breaker
    ?Blowing Machine ?Blowing Machine ?Blowing Machine
    Amplifier module Magnetic switch Pneumatic finger
    ?Blowing Machine ?Blowing Machine ?Blowing Machine
    Electrical control box Detection switch Heating tube

    7. Spare Part List (Free)

    Sequence number Name Quantity Remark
    1 Light tube 5?pcs
    2 0-rings(complete machine) 1set
    3 seal rings 10 pcs
    4 Monkey wrench 1 pcs
    5 cross wrench
    Straight Screwdriver
    Each for1 pcs
    6 High temperature wire, air tube Each for 5 meter
    7 Inner hex wrench(set) 1set
    8 Approach switch 2 pcs
    9 Switch 5 pcs

    8. Optional Configuration (Additional Charge)

    ?Blowing Machine Function:If choosing this device, you only need to provide a network cable, then my company engineers can inspect the operation condition of machine at any corner of the world, with convenient maintenance and troubleshooting?,to provide timely technical support.
    ?Blowing Machine Function: Bottles can directly connect to filling machine in order after bottle blowing done.

    9. Auxiliary Machines

    ?Blowing Machine 1. High pressure air compressor
    Air compressor system, tie-in use combination series high pressure gas system. Convenient?maintenance, easy inspection?and troubleshooting.
    ? 2. Chiller
    Mainly used for cooling the mould and guarantee the bottle part not damaged in the heating process, to improve the quality of finished products and production efficiency.
    ?Blowing Machine 3. Filter system
    Main function is?cool high pressure air to achieve a more ideal working temperature and increase the service life of pneumatic components and?filter the impurities?and oil?in the air, improving?product cleanliness.
    ?Blowing Machine 4. Low pressure air compressor
    Used to provide air?to run machine.
    Technical parameter
    Bottle type specification Cavity 2
    Theory?output 2200-2700
    Max.volume 2L
    Bottle mouth maximum overall DIdiameter 80mm
    Bottle biggest diameter 100mm
    Bottle maximum height 330mm
    Power specifications Light tube quantity 32pcs
    Light tube power 0.75KW
    Maximum heating power 24KW
    All electric machine installation 27KW
    Actual consumption 19KW
    Air pressure specification Work pressure 7-9kg/cm2
    Low-pressure gas consumption 1000L/min
    Blow bottle pressure 25-35kg/cm2
    Higher -pressure gas consumption 1500Ltr/min
    Forzen water specification Work pressure 5-6?kg/cm2
    Temperature range 10℃
    Consumption 5000kcal/hr
    Forzen water flow 30L/min
    Machine specification Size of the machine 2.25×1.6×1.7
    Weight of the machine 2.5ton
    Video Show
    Similar product
    Recommended products
    Contact us

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Suzhou City Chenyu Packing Machinery Co., Ltd.
    ADD : Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang City,Jiangsu,China
    TEL : +86-512-58532188
    FAX : +86-512-58532120
    MOBILE : 013962288333
    Web : www.football-presse.com
    E-mail :tangwei@cyfilling.com
    Contact us
    ADD:Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang
    Tel:+86-0512-58532188
    Mobile:+86-13962288333
    QQ:2355348788
    Fax:+86-0512-58532188
    Email:tangwei@cyfilling.com
    久章草在线视频免费观看