Pure water filling machine using card bottleneck transmission technology to achieve automatic disinfection, washing bottles, filling, capping and other processes, a high degree of automation; The beverage machinery most of the electrical system parts are used abroad advanced products, equipment and liquid contact All the use of high-quality stainless steel materials, with wear-resistant, stable, low failure rate, product quality in the international advanced level. But if found cylinder of pure water filling machine does not work, is what causes it?
There are several reasons and approach:
1、Check the fuse is burned, if burned, please put on a new;
2、Emergency stop switch is pressed, turn the emergency stop switch, make it back in situ;
3、Check the cylinder piston O-ring is sticky, so that the piston stuck, replace the O-ring;
4、Filling the head inside the filling spool is stuck, such as stuck, please re-installed the spool position;
5、Check if the air supply and power switch are on. If not, please turn on the air switch and power supply;
6、Two magnetic switches are intact, if damaged, please replace the new;
7、 Whether the barometer meets the requirements and the availability of air into the machine, access the air supply and determine the pressure to meet the requirements;
8、Check if the cylinder piston is stuck, if there is a problem, please re-install the location;
9、Fixed magnetic switch position, after the magnetic switch must be fixed at the rear of the cylinder can make the cylinder work position, can not move.